 |
|
 |
|
U.S. Air
Filtration stocks a complete line of Goyen Solenoid and
Diaphragm
Valves, multi-valve enclosures, repair kits, controls,
nozzles, and
other Goyen Products-- with worldwide same-day shipping for
most orders made before 5 PM PST. We ship UPS Red,
Blue, or Ground, FedEx Next Day, FedEx Standard, or Pilot
Air. Early orders same or next day. We ship from stock
most repair kits and coils for valves and controls used in
your
dust collection applications. See
below for information on the most commonly used industrial
valves
from Goyen Valve and the Goyen replacement kit that will
match your valve. For information on our full line
of Goyen
industrial valves, repair kits and products, please call a
U.S. Air Filtration Parts
Specialist at 888-221-0312.
Goyen "3
Series" Pulse Jet Valves
-
Goyen "T Series"
General
Purpose Diaphragm Valves (threaded
ports)
-
Goyen "DD
Series" General
Purpose Diaphragm Valves (compression
ports)
-
Goyen "MM
Series" General
Purpose Diaphragm Valves (integrated valves)
-
Goyen "FS
Series" General
Purpose Diaphragm Valves (flange inlet/ slide
outlet)

Goyen "3 Series" Pulse
Jet Valves
(3/4", 1" port
sizes) |

T3 Series |
Superior performance, easy
maintenance diaphragm valve available with threaded ports
(T3 Series), dresser nut ports (DD3 Series) or flange and
slide ports (FS3 Series). Outlet at 90 degrees to inlet. 3
Series valves are available as remote pilot valves and may
be converted to integral pilot applications through the
use of the screw in pilots of the MIP and 3DS series. All
3 Series valves are supplied with CASTEC® protection,
offering 500 hours resistance to salt spray.
Suitable for:
Dust collector applications,
in particular for reverse pulse jet filter cleaning and
its variations including bag filters, cartridge filters,
envelope filters, ceramic filters, and sintered metal
fibre filters.
Construction:
Body: Aluminium
Seals: Nitrile or Viton (diaphragms reinforced)
Spring: 304 SS
Diaphragm Seat: PA-6 (standard), Viton coated mild
steel
Surface Protection: CASTEC® |

DD3 Series |

FS3 Series |
Back to top
Goyen "T
Series" General Purpose
Diaphragm Valves
(3/4",
1", 1.5", 2", 2.5", 3" port
sizes) |
 |
Goyen T Series valves
are high performance diaphragm valves with threaded
ports. Available with an integral pilot or as a
remotely piloted valve. Outlet at 90 degrees to inlet
(considered to be the most optimal design for dust
collector applications).
This design offers ease of
installation, low restriction to air flow, and an
excellent cleaning pulse. The valve has female
threaded ports on the inlet and outlet, facilitating
secure installation to the header-manifold tank
threaded stud pipe. Features seven sizes, spare
parts kits available, and solenoid coils available
in standard AC and DC voltages. |
Suitable for:
Dust collector applications, in
particular for reverse pulse jet filter cleaning
including bag filters, cartridge filters, envelope
filters, ceramic filters, and sintered metal fibre
filters.
Construction:
Body: Aluminium (diecast)
Ferrule: 304 SS
Armature: 430FR SS
Seals: Nitrile or Viton (reinforced)
Spring: 304 SS
Screws: 302 SS
Diaphragm Seat: PA-6 (standard), Viton coated mild
steel or High Density PE
General purpose
diaphragms are made from Buena Nitrile elastomer,
reinforced with nylon mesh,
and are suitable for temperatures ranging from -40
degrees F to 180
degrees F. Viton diaphragms are available for
high temperature
applications. |
Pipe or
Orifice Size |
Valve Model |
CV |
KV |
Diaphragm Repair Kits |
| INCHES |
MM |
Buena Nitrile |
Viton |
|
3/4 |
20 |
CA20T /
RCA20T |
14 |
12 |
K2000 |
K2007 |
| 1 |
25 |
CA25T /
RCA25T |
24 |
20.6 |
K2501 |
K2503 |
|
1.5 |
40 |
CA35T /
RCA35T |
42 |
36.1 |
K3500 |
K3501 |
|
1.5 |
40 |
CA45T2 /
RCA45T2 |
53 |
46.4 |
K4502 |
K4503 |
| 2 |
50 |
CA50T /
RCA50T |
88 |
75.6 |
K5004 |
K5000 |
|
2.5 |
62 |
CA62T /
RCA62T |
106 |
91.2 |
K5004 |
K5000 |
| 3 |
76 |
CA76T /
RCA76T |
167 |
143.6 |
K7600 |
K7601 |
Please call us
at 888-221-0312 to inquire about pricing on these items;
prices subject to change. |
To place an order, call a
U.S. Air Filtration Parts Specialist at
888-221-0312.
Back to top
Goyen "DD Series"
General Purpose
Diaphragm Valves
(3/4", 1", 1.5" port
sizes)
|
 |
Goyen DD Series valves
provide the same efficiency and reliability as the T
Series, with the
added benefit of a
double dresser compression coupling, providing quick
and simple
installation. These are high performance
diaphragm valves with dresser nut ports. Available
with either integral
pilot solenoids (CA Models) or remote pilot solenoids
(RCA Models). Outlet 90 degrees to
inlet. |
Suitable for:
Dust collector applications, in
particular for reverse pulse jet filter cleaning and
its variations including bag filters, cartridge
filters, envelope filters, ceramic filters, and
sintered metal fibre filters.
Construction:
Body and Dresser:
Nuts: Aluminium (diecast)
Ferrule: 304 SS
Armature: 430FR SS
Seals: Buena Nitrile or Viton (reinforced)
Spring: 304 SS
Screws: 302 SS
Dresser Nut Seals: Nitrile or Viton
Diaphragm Seat: PA-6 (standard), Viton coated mild
steel or High Density PE |
Pipe or
Orifice Size |
Valve Model** |
CV |
KV |
Diaphragm Repair Kits |
| INCHES |
MM |
Buena Nitrile |
Viton |
|
3/4 |
20 |
CA20DD /
RCA20DD |
14 |
12 |
K2000 |
K2007 |
| 1 |
25 |
CA25DD /
RCA25DD |
24 |
20.6 |
K2501 |
K2503 |
|
1.5 |
40 |
CA45DD2/
RCA45DD2 |
53 |
46.4 |
K4502 |
K4506 |
Please
call us at 888-221-0312 to inquire about pricing on these
items.
** RCA
designates that the valve is remotely
actuated. CA
valves have integral pilot solenoids, so please
know voltage
and connection desired prior making an
order. |
To place an order, call a
U.S. Air Filtration Parts Specialist at
888-221-0312.
Back to top
Goyen "MM
Series" General
Purpose Diaphragm Valves
(1", 1.5", 3",
4", 8" port sizes)
|
 |
Goyen MM Series dust
collector valves are a very high performance valve,
developed specifically to meet a growing need for a
diaphragm valve that would integrate directly into a
header tank. This valve is designed to be mounted
directly into the compressed air manifold.
This offers the advantages of improved valve flow
characteristics, ease
of on-site installation, elimination of some fittings
and scope to offer
customized products. MM valves offer improved
flow characteristics
through the valve outlet into the blow tube because
the valve is
integral to the header-manifold-tank. These valves are
designed to fit
square or round header tanks fitted with adaptors.
1" and 1.5" models are
supplied with outlet pipes to length specified.
3" model is supplied without outlet
pipes. |
Suitable for:
Dust collector applications, in
particular for reverse pulse jet filter cleaning
including bag filters, cartridge filters, envelope
filters, ceramic filters, and sintered metal fibre
filters.
Construction:
Body and Dresser:
Nuts: Diecast Aluminium
Ferrule: 304 SS
Armature: 430FR SS
Diaphragm and Seals: Nitrile or Viton
(reinforced)
Spring: 304 SS
Screws: 302 SS
Outlet Pipe: Schedule 40 wrought steel zinc
passivated
Diaphragm Seat: PA-6 (standard), Nitrile coated mild
steel (76MM standard) or Viton coated mild steel
(all sizes)
Additional
construction:
Body,
cover, seal retainer and compression coupling
connectors are pressure
die cast aluminum. The pipe connecting the top
and bottom sections
is schedule 40 steel of commercial quality.
Seals and o-rings are
nitrile rubber for temperatures between -40 and 82
degrees C. For
higher temperatures, Viton seals and o-rings are
available. The ferrule
and plunger for the CA versions are stainless
steel. |
| Round
Header Size |
Pipe or Orifice Size |
Valve Model |
CV |
KV |
Diaphragm Repair Kits |
| INCHES |
INCHES |
MM |
Buena Nitrile |
Viton |
|
4,6,8 |
1 |
25 |
CA25MMD /
RCA25MMD |
30 |
25.8 |
K2501 |
K2503 |
|
4,6,8 |
1 |
25 |
CA25MMP /
RCA25MMP |
30 |
25.8 |
K2501 |
K2503 |
|
6,8,10 |
1.5 |
38 |
CA40MMD /
RCA40MMD |
51 |
43.8 |
K4000 |
K4007 |
|
6,8,10 |
1.5 |
38 |
CA40MMP /
RCA40MMP |
51 |
43.8 |
K4000 |
K4007 |
|
NA |
3 |
76 |
CA76MMS /
RCA76MMS |
233 |
200.4 |
K7600 |
K7601 |
Please call us
at 888-221-0312 to inquire about pricing on these
items. |
To place an order, call a
U.S. Air Filtration Parts Specialist at
888-221-0312.
Back to top
Goyen "FS Series"
General Purpose
Diaphragm Valves
(1", 1.5" port
sizes)
|
 |
Goyen FS Series dust
collector valves are revolutionary in design with
flanged inlet port and
slide seal outlet port for easy valve installation and
removal. The blow tube slides into the valve
outlet and is
restrained at the end remote from the valve.
This feature,
combined with a valve outlet long enough to protrude
into the baghouse,
provides a great opportunity to reduce costs while
facilitating easier
filter servicing.
Available with integral pilot or as remotely
piloted valve. Outlet at 90 degrees to
inlet. |
Suitable for:
Dust collector applications, in
particular for reverse pulse jet filter cleaning
including bag filters, cartridge filters, envelope
filters, ceramic filters, and sintered metal fibre
filters.
Construction:
Body: Diecast Aluminium or 316
Stainless Steel
Ferrule: 304 SS
Armature: 430FR SS
Seals: Nitrile or Viton (reinforced)
Spring: 304 SS
Screws: 302 SS
Outlet Slide Seal: EPDM or Viton
Diaphragm Seat: PA-6 (standard), Viton coated mild
steel
Additional
Construction:
The
FS Series valve bodies and covers are manufactured
from glass filled
nylon. Both the 25FS and 45FS models are
available in pressure die
cast aluminum or stainless steel bodies and
covers. General
purpose diaphragms are made of Buena Nitrile
reinforced with nylon mesh.
For high temperature applications, Viton kits are
available. The
20FS uses only neoprene diaphragm material rated at
0-60 degrees C. |
| Pipe or Orifice Size |
Valve Model |
CV |
KV |
Diaphragm Repair Kits |
| INLET
INCHES |
INLET MM |
OUTLET
INCHES |
OUTLET MM |
Buena Nitrile |
Viton |
| 1 |
25 |
.75 |
20 |
CA20FS /
RCA20FS |
16 |
13.8 |
K2011 |
|
|
1.5 |
40 |
1 |
25 |
CA25FS /
RCA25FS |
32 |
28.4 |
K2512 |
K2513 |
| 2 |
50 |
1.5 |
40 |
CA45FS /
RCA45FS |
65 |
55.6 |
K4516 |
K4519 |
Please call us
at 888-221-0312 to inquire about pricing on these
items. |
To place an order, call a
U.S. Air Filtration Parts Specialist at
888-221-0312.
Back to top
Goyen "Millennium Series" Dust
Collector Valves

This new line of improved
performance dust collector valves from Goyen valves
incorporates the
proven performance and quality from Goyen with many new and
exciting
features:
- Screwless assembly
proven to resist rusting of the thread
- Goyen's easiest
valve to service-- reduces maintenance time by up to
30%
- More efficient
design offers opportunity to fit smaller valves with equal
performance of larger valves into tight spots
- Greatly reduced
pressure drops across the valve provide higher flow rates
to result
in 20-40% better performance than standard valves
- No modifications
required to replace existing valves of equal size with
these valves
- New surface finish
with a 500 hour salt spray resistance rating for extra
longevity and
corrosion resistance
The new Millennium valves
are manufactured with the same features as the traditional T
Series, FS
Series, and MM Series.
To place an order, call a
U.S. Air Filtration Parts Specialist at
888-221-0312.
Back to top
Goyen Pilot Solenoid Valves &
Enclosures
RCA3D Remote Pilot
Solenoids control the actuation of dust collector diaphragm
valves, and
are suitable for all Goyen dust collector diaphragm
valves. Goyen
Solenoid valves are available in 12 Volt DC, 24 Volt DC, 120
Volt AC and
most other common voltages. Below, see examples of the
different
types of connections. Additionally, if you are looking
for valves
and enclosures suitable for external locations, or hazardous
areas,
Goyen offers a range of valves that will serve your
needs. These
models are specifically designed to ensure the correct
operation of the
diaphragm valves that they control. Our most popular
model is the
RCA3D2T, which is featured in the table below. This
solenoid
powers the majority of the Goyen diaphragm valves.
Construction: Body
is aluminum, ferrule is 304 SS, armature is 430FR SS, seals
are nitrile,
Locknut is mild steel zinc passivated, screws are 302 SS,
clip is mild
steel (plated). ALL COILS ARE AVAILABLE IN MOST COMMON
VOLTAGES,
please call a U.S. Air Filtration sales representative at
888-221-0312
to discuss your specific application.
 |
3D2 Valve
with QF type coil or flying leads |
 |
Conduit
entry or type QD pilot valve |
 |
Screw /
Spade terminal type pilot valve, or QT type |
 |
Din socket
type coil arrangement, or QR type |
 |
Pilot valve
bank, also known as a solenoid enclosure. These
enclosures come in many sizes to suit your needs.
These enclosures hold the RCA3D type QT coil to make
wiring
to the box as simple as possible.
Available in
the following models:
- 3-5V
Enclosure: has five pilot valves housed in a
NEMA
IV enclosure
- 3-8V
Enclosure: has eight pilot valves housed in
a NEMA
IV enclosure
- 3-12V
Enclosure: has twelve pilot valves housed in a
NEMA IV enclosure
|
To place an order, call a
U.S. Air Filtration Parts Specialist at
888-221-0312.
Back to top
 |